MAXTRAX Kinetic rope, length 2m

Obrázek
Obrázek
Obrázek (1)
Obrázek (2)
Obrázek (3)
Obrázek (4)
144,4 EUR 119,3 EUR excl. VAT
MAXTRAX Kinetic rope, length 2m for extreme use in vehicle recovery. The elasticity/expansion of the rope is 30%. The use of kinetic ropes when rescuing stuck vehicles, especially from deep mud, san...More information
Variants
Velikost
2mIn stock
3mIn stock
5mIn stock
10mIn stock
In stock
Personally in shop:tomorrowWith a delivery company:Wednesday 28.2
CodeMTXKR2
MAXTRAX Kinetic rope, length 2m
MAXTRAX Kinetic rope, length 2m for extreme use in vehicle recovery.
The elasticity/expansion of the rope is 30%.
The use of kinetic ropes when rescuing stuck vehicles, especially from deep mud, sand, snow, has its indisputable advantages compared to the use of classic static ropes and flat straps/courts, and above all, they allow the use of the "market" option during the rescue, which causes the connection of the kinetic energy of the rescuing moving vehicle and kinetic energy in the rope that accumulates in it when it is stretched and then stretched to the maximum level.
The subsequent "market" transferred to the stuck vehicle is many times greater than when using static means.
With our kinetic ropes, we recommend using only our textile rescue shackles/shackles, which are designed as the weakest link in the system. This way, you will not damage the rope in extreme cases of use, the protective element always fails, namely our textile shackle/stirrup.
When using MAXTRAX kinetic recovery devices, it is necessary to always use only fixed anchor points intended for this purpose, both on the vehicle to be recovered and on the rescue vehicle. If this principle is not observed, there is a risk of damage to one or both vehicles. Rescue powers are great, so keep that in mind.
If the length of the rope is insufficient, you can extend it with a MAXTRAX static rope.
Make the connection again using the MAXTRAX textile shackle/shackle.
Ensure that all persons are at a sufficient, safe distance from the vehicles during recovery operations.
Place a load "blanket" on the rope which, in case of failure, will dampen its ejection against one of the vehicles.
It is recommended that the minimum tether strength be between 2 and 3 times the total weight of the rescue vehicle.
Before use, familiarize yourself with the instructions and instructions on the product packaging!
Kinetic ropes are not intended for towing vehicles or for lifting loads.
If the rope is soaked in water, its elasticity/extensibility is reduced.
Weight: 1.4 kg
Length/diameter 2m x 24mm
Rope capacity: 12000 kg
Made: Nylon 66 and polyester
Velikost2m
ObrázekObrázek
Obrázek (1)Obrázek (1)
Obrázek (2)Obrázek (2)
Obrázek (3)Obrázek (3)
Obrázek (4)Obrázek (4)
DescriptionPictures
We care about your privacy

This online store stores cookies that help it function properly. By using our services, you agree to their use.

Allow everythingDetailed settings