MAXTRAX kinetic rope shock absorber, harness protection
MAXTRAX kinetic rope shock absorber, harness protection. For use, you need to have two PET bottles with water, sand, or other heavy material ready, which you put in the two designated pockets of the s...More information
In stock
MAXTRAX kinetic rope shock absorber, harness protection
For use, you need to have two PET bottles with water, sand, or other heavy material ready, which you put in the two designated pockets of the shock absorber.
Now close the pockets by double folding over their edge and fasten with clips (sea bag system).
Using the MAXTRAX textile shackle/shackle, pass the unconnected shackle through the designated hole in the MAXTRAX shock absorber and then through the eye of the MAXTRAX kinetic rope, not the MAXTRAX static rope, and then connect the MAXTRAX textile shackle/shackle.
Subsequently, move the pulled knot of the MAXTRAX shackle/shackle so that the entire resulting loop pulls at an angle of 90 relative to the position of the knot.
Then just throw the entire MAXTRAX shock absorber assembly over the rope or let it hang down freely.
The assembly with a secure harness is thus ready for safe use.
The use of kinetic ropes when rescuing stuck vehicles, especially from deep mud, sand, snow, has its indisputable advantages compared to the use of classic static ropes and flat straps/courts, and above all, they allow the use of the "market" option during the rescue, which causes the connection of the kinetic energy of the rescuing moving vehicle and kinetic energy in the rope that accumulates in it when it is stretched and then stretched to the maximum level.
The subsequent "market" transferred to the stuck vehicle is many times greater than when using static means.
With our kinetic ropes, we recommend using only our textile rescue shackles/shackles, which are designed as the weakest link in the system. This way, you will not damage the rope in extreme cases of use, the protective element always fails, namely our textile shackle/stirrup.
When using MAXTRAX kinetic recovery devices, it is necessary to always use only fixed anchor points intended for this purpose, both on the vehicle to be recovered and on the rescue vehicle. If this principle is not observed, there is a risk of damage to one or both vehicles. Rescue powers are great, so keep that in mind.
If the length of the rope is insufficient, you can extend it with a MAXTRAX static rope.
Make the connection again using the MAXTRAX textile shackle/shackle.
Ensure that all persons are at a sufficient, safe distance from the vehicles during recovery operations.
Place a load "blanket" on the rope which, in case of failure, will dampen its ejection against one of the vehicles.
It is recommended that the minimum tether strength be between 2 and 3 times the total weight of the rescue vehicle.
Before use, familiarize yourself with the instructions and instructions on the product packaging!
Kinetic ropes are not intended for towing vehicles or for lifting loads.
If the rope is soaked in water, its elasticity/extensibility is reduced.
Weight: 0.230 kg
Dimensions: 530x390mm
Made of 420 Denier Oxford Nylon and polypropylene webbing
| Výrobce | MAXTRAX |
Obrázek
Obrázek (2)
Obrázek (3)
Obrázek (4)
Obrázek (5)DescriptionPictures
This online store stores cookies that help it function properly. By using our services, you agree to their use.